屈天鹏

教授/冶金工程系

个人联系信息

通讯地址：苏州市相城区济学路8号苏大阳澄湖校区

联系电话：13812759225

电子邮件：[email protected]

学习工作经历

1999年-2003年，东北大学材料与冶金直播平台，冶金工程专业，获学士学位

2003年-2005年，东北大学材料与冶金直播平台，助教

2005年-2011年，东北大学材料与冶金直播平台，钢铁冶金专业，获工学博士学位

2008年-2009年，大阪大学接合科学研究所，国家建设高水平大学项目资助公派留学

2011年-2014年，中冶赛迪集团国家钢铁冶炼装备系统集成工程技术研究中心，高级工程师

2015年-至今，  直播平台-色播-色播平台 ，冶金工程系，教授

主要研究方向

1.连铸工艺原理与铸坯质量控制

2.工业过程传输现象数值仿真技术与智能控制

3.金属材料焊接工艺与焊接材料研究

4.超高强钢电弧增材制造工艺与丝材开发

5. TRIZ创新方法理论与应用推广

承担科研项目

1.国家自然科学基金面上项目（52174321），主持

2.国家自然科学基金面上项目（51774208），主持

3.江苏省自然科学基金青年项目（BK20150334），主持

4.江苏省科技成果转化专项资金项目（BA2023024），主要完成人

5.冶炼全流程数学物理模拟平台研究与开发，横向课题，主持

6. KR高效、低成本脱硫技术研究与应用，横向课题，主持

7.82B钢中非金属夹杂物特征分析研究，横向课题，主持

8.超高强钢焊接冶金行为研究，军口课题，主持

代表性论著

1. 全齐,屈天鹏,秦俊山, et al.连铸中间包内流体运动形态模型分析研究[J].炼钢, 2023, 39(04): 37-47.

2. 李向龙,孙群,屈天鹏, et al.电磁搅拌对液态夹杂物聚并及去除行为的影响规律[J].连铸, 2023(01): 10-17+30.

3. Zhou X Z, Wang D Y, Li X L, et al. Mechanism for TiN refinement and resultant heterogeneous nucleation of 8-Fe in magnesium-rare earth-treated ultrapure ferritic stainless steel[J]. Materials Characterization, 2023, 205.

4. Xu Y J, Wang D Y, Sheng M Q, et al. The Effect of Heat Treatment on Phase Structure and Mechanical and Corrosion Resistance Properties of High Tungsten Ni-W Alloy Coating[J]. Coatings, 2023, 13(9).

5. Su L J, Tian J, Hu S Y, et al. Effect of Ca/Mg on Distribution and Morphology of MnS Inclusions in 45MnVS Non-Quenched and Tempered Steel[J]. Metals, 2023, 13(1).

6. Quan Q, Zhang Z X, Qu T P, et al. Physical and numerical investigation on fluid flow and inclusion removal behavior in a single-strand tundish[J]. Journal of Iron and Steel Research International, 2023, 30(6): 1182-1198.

7. Li X L, Wang H H, Tian J, et al. Investigation on the Alloy Mixing and Inclusion Removement through Using a New Slot-Porous Matched Tuyeres[J]. Metals, 2023, 13(4).

8. Li X L, Wang D Y, Tian J, et al. Modeling of Bubble Transportation, Expansion, as Well as Adhesion of Inclusions in a Ladle With Different Tuyeres[J]. Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 2023.

9. Wang H H, Li L, Sheng S Z, et al. Synthesis of low-cost Co-Sn-Pd/rGO catalysts via ultrasonic irradiation and their electrocatalytic activities toward oxygen reduction reaction[J]. Canadian Journal of Chemical Engineering, 2022, 100: S160-S171.

10. Pan P, Hou D, Wang D Y, et al. Effect of magnesium treatment on microstructure and property of H13 die steel during EAF-LF-VD-CC steelmaking process[J]. Journal of Materials Research and Technology-Jmr&T, 2022, 21: 416-428.

11. Li X L, Hu S Y, Wang D Y, et al. Inclusion Removements in a Bottom-Stirring Ladle with Novel Slot-Porous Matched Dual Plugs[J]. Metals, 2022, 12(1).

12. Li L, Sheng S Z, Wang H H, et al. Electrodeposition of Ni-P alloy from deep eutectic solvent and its electrocatalytic activity toward hydrogen evolution reaction[J]. Canadian Journal of Chemical Engineering, 2022, 100(11): 3381-3394.

13. Hou D, Wang D Y, Zhou X Z, et al. Study on Physical and Chemical Properties of Slag Used for Electroslag Remelting of Superalloy Containing Titanium and Aluminum[J]. Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 2022, 53(5): 2972-2990.

14. 王德永,全齐,屈天鹏.连铸单流中间包钢液非稳态流动行为物理模拟[J].连铸, 2021(05): 60-68.

15. Shi L W, Zhou X Z, Wang D Y, et al. Evolution of Inclusions in Magnesium-Calcium-Treated Liquid Iron[J]. Metals, 2021, 11(8).

16. Qu T P, Wang D Y, Wang H H, et al. Interface characteristics between TiN and matrix and their effect on solidification structure[J]. Journal of Iron and Steel Research International, 2021, 28(9): 1149-1158.

17. Li X L, Li B K, Liu Z Q, et al. Evaluation of Slag Entrapment in Continuous Casting Mold Based on the LES-VOF-DPM Coupled Model[J]. Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 2021, 52(5): 3246-3264.

18. Li X L, Hu S Y, Wang D Y, et al. Effect of Electromagnetic Frequency on the Flow Behavior in Mold during Bloom Casting[J]. Metals, 2021, 11(11).

19. Hu S Y, Wang D Y, Li X L, et al. Enrichment Characteristics of Cr in Chromium Slag after Pre-Reduction and Melting/Magnetic Separation Treatment[J]. Materials, 2021, 14(17).

20. Hu S Y, Wang D Y, Hou D, et al. Research on the Preparation Parameters and Basic Properties of Premelted Calcium Aluminate Slag Prepared from Secondary Aluminum Dross[J]. Materials, 2021, 14(19).

21. Hou D, Wang D Y, Jiang Z H, et al. Investigation on Slag-Metal-Inclusion Multiphase Reactions During Electroslag Remelting of Die Steel[J]. Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 2021, 52(1): 478-493.

22. 王德永,屈天鹏.镁洁净钢新技术发展与展望[J].炼钢, 2020, 36(05): 1-13+20.

23. 田俊,王德永,屈天鹏.非调质钢中MnS的析出与长大[J].钢铁研究学报, 2020, 32(08): 740-745.

24. 屈天鹏,王德永,王慧华.镁处理对含Ti包晶钢中TiN析出行为影响的热力学分析（英文）[J]. Journal of Central South University, 2020, 27(12): 3637-3651.

25. Wang C N, Li L, Wang H H, et al. Tunable Ni/Fe-Mo carbide catalyst with high activity toward hydrogen evolution reaction[J]. Canadian Journal of Chemical Engineering, 2020, 98(8): 1784-1793.

26. Qu T P, Zhang C W, Wang D Y, et al. Effect of Mg-Ti Treatment on Nucleation Mechanism of TiN Inclusions and Ferrite[J]. Metals, 2020, 10(6).

27. Qu T P, Wang D Y, Wang H H, et al. Thermodynamic analysis on tin precipitation behavior in Ti-bearing peritectic steel after magnesium treatment[J]. Journal of Central South University, 2020, 27(12): 3637-3651.

28. Qu T P, Wang D Y, Wang H H, et al. Effect of Magnesium Treatment on the Hot Ductility of Ti-Bearing Peritectic Steel[J]. Metals, 2020, 10(10).

29. Hou D, Wang D Y, Jiang Z H, et al. The Design of Slag and Electroslag Remelting Production Technology of Steel Containing Zirconium[J]. Journal of Sustainable Metallurgy, 2020, 6(3): 463-477.

30. 张采薇,屈天鹏,王德永.镁钛复合处理对不锈钢凝固组织的影响及机制[J].钢铁研究学报, 2019, 31(07): 661-667.

31. 秦俊山,屈天鹏,王德永.高碳钢82B微镁处理工艺研究[J].炼钢, 2019, 35(01): 18-23+28.

32. Ming Z, Wang K H, Qu T P. Thermodynamic study on welding wire design of high nitrogen austenitic stainless steel[J]. China Welding, 2019, 28(01): 49-55.

33. 冯巍,屈天鹏,王德永.冶金过程旋涡流动行为模拟研究[J].连铸, 2019, 44(05): 1-5.

34. 陈开来,王德永,屈天鹏.钢中液态夹杂物聚并行为的数学物理模拟[J].工程科学学报, 2019, 41(10): 1280-1287.

35. 鲍振东,屈天鹏,施利魏.近平衡条件下高氮钢中氮元素行为研究[J].炼钢, 2019, 35(06): 12-15+23.

36. Qu T P, Tian J, Chen K L, et al. Precipitation behaviour of TiN in Nb-Ti containing alloyed steel during the solidification process[J]. Ironmaking & Steelmaking, 2019, 46(4): 353-358.

获奖情况

1.国家级一流本科课程负责人（虚拟仿真类），2023，排2/6

2.中国钢铁工业协会、中国金属学会冶金科学技术一等奖，2021，排4/15

3.中国发明协会发明创业奖创新奖二等奖，2023，排5

4.江苏省一流本科课程（虚拟仿真类），2021，排2